ADJUSTABLE FOCUS AUTOCOLLIMATORS
Type AKRV CCD - 90° Viewing
with Adjustable Focus and
CCD Camera Mount
The principle, function and layout resemble the autocollimator with 90° viewing. The eyepiece and eyepiece reticle are replaced by a mount for a CCD camera and the autocollimation image is directly imaged on the CCD chip when the camera is mounted. With no eyepiece reticle the displacement of the return image is measured on a video monitor or using a computer and software.
TYPE AKRV CCD 90° VIEWING & ADJUSTABLE FOCUS w/ CCD CAMERA MOUNT
Notes on ordering:
When considering placing an order please note the following:
CCD-Camera and computer hardware/software are NOT included.
As this type of autocollimator does not have an eyepiece reticle a direct measurement of the reticle displacement is impossible. Additional computer with software is needed in this case.
For angular measurement the autocollimator should be equipped with a negative crosshair reticle. Resolution target or Siemens starcan be used to check the image quality.
One reticle and bulb illumination (6V/5W, without transformer) are included in the delivery. Please specify the reticle when ordering!
If not specified otherwise, the autocollimator is adjusted to infinity at 546 nm wavelength. Adjustment to other distances or wavelengths is also possible on demand.
The nomenclature of the autocollimators with adjustable focus setting and with 90° viewing and CCD-Camera mount is shown in the right hand graphic.
TYPE AKRV CCD 90° VIEWING w/ ADJUSTABLE FOCUSING & CCD CAMERA MOUNT
Small Size Apertures
CA = Clear Aperture FL = Focal Length TE = Tube Extension MR = Measurement Range
TYPE AKRV CCD 90° VIEWING w/ ADJUSTABLE FOCUSING & CCD CAMERA MOUNT
Mid-Size Apertures
CA = Clear Aperture FL = Focal Length TE = Tube Extension MR = Meas. Range
TYPE AKRV CCD 90° VIEWING w/ ADJUSTABLE FOCUSING & CCD CAMERA MOUNT
Large Size Apertures
CA = Clear Aperture FL = Focal Length TE = Tube Extension MR = Meas. Range