ELCOMAT direct PRODUCT LINE
ELCOdirect Software
The ELCOdirect software is already included in the scope of delivery of the ELCOMAT direct product line. The software can automatically and simultaneously detect up to 10 cross positions and automatically determine the wedge angle or the 90 angle error of 90 prisms.
Note: Executable under Windows / The software is not suitable for the ELCOMAT product line in general. It is only for the ELCOMAT direct products.
ELCOdirect Software
Configuration of the Area of Interest
The software allows flexible adjustment of the camera's area of interest and measurement frequency. For example, the measurement frequency can be increased by selecting a smaller area of interest. The exposure time is automatically adjusted to the brightness of the image to ensure optimum conditions for evaluation.
ELCOdirect Software
Cartesian or Polar Coordinates
The value display can be configured to display angle values, wedge angles or height differences in relation to a freely selectable base length. The values can be displayed as cartesian coordinates or polar coordinates.
Click on image for enlarged drawing.
ELCOdirect Software
Tolerances
Go/NoGo tolerances can be displayed for quick and easy evaluation of the measurement result.
Click on image for enlarged drawing.
ELCOdirect Software
Centering Option
With the centering option of the ELCOdirect software, the centering error of optical components to the common optical axis of the entire system or the wobble error of rotary tables etc. can be calculated.
Click on image for enlarged drawing.
ELCOdirect Software
Communication Settings
The angle measurements can be sent to another computer via the RS-232 interface. The baud rate and other communication parameters can be completely configured in the software. In addition, it is possible to transfer the measured values via the Windows clipboard to another application (e.g. ELCOWIN) on the same computer.