ELCOMAT electronic autocollimators visual autocollimators, collimators, telescopes and optical metrology

home · about · email

PRODUCTS

APPLICATIONS

ARTICLES

CONTACT US

 

Electronic Autocollimators

ELCOMAT 3000: A two axis electronic autocollimator capable of measuring angles to 0.05 arc sec over a range of 2000 arc sec with near zero drift. Alignment for signal acquisition is very easy due to the wide measuring range.

The ELCOMAT 3000 is the ideal electronic autocollimator for precision angle measurement both in the laboratory and on the shop floor. User-programmable tolerances can be set to indicate go, no-go limits for Quality Control work, and 9 steps of display-zoom facilitate fine adjustment tasks.

 

ELCOMAT VARIO : A two axis electronic autocollimator capable of measuring angles to 0.1 arc sec over different ranges depending upon the focal length of the objective chosen from the catalog; very low drift.

The ELCOMAT VARIO is ideal for automated measuring tasks, is available in different focal lengths, and has different resolutions and ranges for different measuring applications. User-programmable tolerances can be set to indicate go, no-go limits for Quality Control work, and 9 steps of display-zoom facilitate fine adjustment tasks.

 

ELCOMAT HR: A two axis electronic autocollimator capable of measuring angles to 0.005 arc sec over a range of 300 arc sec with near zero drift. Alignment for signal acquisition is very easy due to the relatively wide measuring range.

The ELCOMAT HR is designed for applications in Standards Laboratories where the highest accuracy and resolution are required. User-programmable tolerances can be set to indicate go, no-go limits for Quality Control work, and 9 steps of display-zoom facilitate fine adjustment tasks.

 

All Elcomats share the same control unit and display options with an RS-232 output for computer interface. The Elcomat Series of electronic autocollimators uses LEDs as light sources and CCD detectors. The display can be read in arc sec, minutes, degrees, or radians.

Alignment for signal acquisition is very easy due to the wide measuring range. The relatively slow rise-time of the CCD detectors limits the data rate to 25 measurements per second or 25Hz.

Please contact us for information on Electronic Autocollimators.
Voice- 802 460 1790
Email- mail@vermontphotonics.com

Used For:
  • Angle Measurement
  • Alignment
  • Flatness and Straightness
  • Mechanical Systems Alignment
  • Prism Measurements
  • Squareness
Related Items:
 

Home | About Us | Products | Applications | Articles | Contact Us

TeraHertz Lasers

Vermont Photonics Technologies Corp.
P.O. Box 516 • 33 Bridge Street
Bellows Falls, Vermont 05101
Tel 802 460 1790 • Fax 802 460 1796
mail@vermontphotonics.com